济南金大和门业专业生产济南电动门，是一个在业界得到认可、客户一致好评的企业。经过多年的研究开发、生产实践，产品的技术含量以及外观造型已达到业界领先水平，并可根据客户要求订做，实现集研发、生产、销售、售后跟踪一条龙服务。
1、预埋轨道
1, the embedded track
2、固定门体:将门体放入轨道,尾部的底撑用专用固定卡及地脚膨胀螺钉(M12×80)固定.
2, fixed the door: the door body into orbit, the tail of the bottom support expansion screws using special fixing clamp and anchor (M12 * 80) fixed
3、限位开关:按照设定门体的开、关位置埋设限位装置.
3, limit switch: according to set the door open, closed position buried limiting device
4、固定控制盒:控制盒可以装在机头箱内,也可移至离主机10米之内的室内.
4, the fixed control box: control box can be installed in the machine box, can also be moved away from the host within 10 meters of the room
5、连接线路:严格按接线图依次接好相对应的连线(严禁在通电状态下接线),接线要牢固,端子与端子之间不能短路,并捡查线路是否正确.
5, connection line: in strict accordance with the wiring diagram are sequentially connected corresponding connection (no connection in the electrifying state), connecting to the firm, between the terminal and the terminal can not be short circuited, and check the wiring is correct
6、调试:
6, debugging:
1)、首先用手动的方式人工推拉门体,检查门体运行是否正常,在确定门体运行正常的情况下,方可接通电源.
1), the first artificial sliding door body manually operation, check the door body is normal, in the situation to determine the door body running, can be connected to power
2)、接通电源,控制盒电源指示灯亮,按"开"按纽,"开"指示灯亮,门体能自动打开至设定的限位处自动停止.按"关"按纽 ,"关"指示灯亮,门体能自动关闭至设定的限位处自动停止.
2), the power supply is switched on, the control box, the power indicator light, according to the "open" button, "open" indicator lights, door can be automatically opened to set the limit at the stop automatically. According to the "off" button "," bright lights, door can automatically close to set the limit at the auto stop
3)、在调试运行过程如发现门体运行限位不准确,可调整限位开关的高度.
3), in the debugging and running process such as the discovery of the door operation limit is not accurate, adjustable limit switch height
4)、调试运行5次以上,如一切正常方可投入使用.
4), debugging and running more than 5 times, if everything is normal can be put into use